top of page

Kelly Alexandra Hoff Class

Public·7 members

Motorola Wimax CPEi 23825 HACK.22

Motorola Wimax CPEi 23825 HACK.22: How to Customize Your Router Settings

If you have a Motorola Wimax CPEi 23825 device and want to customize its settings, you might be interested in this article. Here, we will show you how to change the logo, the VoIP settings, and the Wimax internet settings of your device using a hack called HACK.22.

What is Motorola Wimax CPEi 23825?

Motorola Wimax CPEi 23825 is a wireless broadband router that uses the Wimax technology to provide high-speed internet access. It has a built-in antenna, a phone jack, and four Ethernet ports. It also supports VoIP (Voice over Internet Protocol) services, which allow you to make and receive phone calls over the internet.

Download File:

What is HACK.22?

HACK.22 is a hack that allows you to access the hidden settings of your Motorola Wimax CPEi 23825 device. It was developed by a group of hackers who wanted to improve the performance and functionality of their routers. With HACK.22, you can change the logo of your device, modify the VoIP settings, and optimize the Wimax internet settings.

How to Hack Motorola Wimax CPEi 23825 with HACK.22?

To hack your Motorola Wimax CPEi 23825 with HACK.22, you will need the following:

  • A computer with an internet connection

  • A USB flash drive

  • A RJX 50 Tamlam device (optional)

Follow these steps to hack your router:

  • Download the HACK.22 file from [this link] and save it on your USB flash drive.

  • Connect your USB flash drive to your computer and open the HACK.22 file.

  • Follow the instructions on the screen to install the hack on your router.

  • Once the installation is complete, disconnect your USB flash drive from your computer and plug it into your router.

  • Restart your router and wait for it to boot up.

  • Open your web browser and type in the address bar.

  • Login with the username admin and the password motorola.

  • You will see a new menu called HACK.22 on the left side of the screen.

  • Click on it and explore the different options available.

  • To change the logo of your device, click on Logo Settings and upload any image file you want.

  • To modify the VoIP settings, click on VoIP Settings and enter the parameters you want.

  • To optimize the Wimax internet settings, click on Wimax Settings and adjust the values you want.

  • Click on Save Changes and Apply Settings to confirm your changes.

  • Congratulations! You have successfully hacked your Motorola Wimax CPEi 23825 with HACK.22!

How to Boost Your Wimax Signal with RJX 50 Tamlam?

If you want to boost your Wimax signal and speed, you can use a device called RJX 50 Tamlam, which is a signal amplifier that can enhance the performance of your router. To use it, you will need to connect it between your router and your antenna using a coaxial cable. Then, you will need to adjust the knobs on the device until you get the best signal strength and quality. You can also use HACK.22 to fine-tune your Wimax settings for optimal results.


In this article, we have shown you how to hack your Motorola Wimax CPEi 23825 with HACK.22 and how to boost your Wimax signal with RJX 50 Tamlam. By following these steps, you can customize your router settings and enjoy a better internet experience. However, please note that hacking your router may void its warranty and expose it to security risks. Therefore, proceed at your own risk and responsibility.


Welcome to the group! You can connect with other members, ge...


Group Page: Groups_SingleGroup
bottom of page